Author Topic: Fixing a Pioneer Elite Pro 200 RPTV  (Read 9694 times)

0 Members and 5 Guests are viewing this topic.

Offline Chavo

  • x86
  • Hero Member
  • *****
  • Posts: 2219
  • no u
    • View Profile
    • Chavoland
Re: Fixing a Pioneer Elite Pro 200 RPTV
« Reply #15 on: June 11, 2009, 01:21:53 pm »
"goes ZAP" ?

Are you hearing snapping or popping sound?

Offline rabbit

  • x86
  • Hero Member
  • *****
  • Posts: 8092
  • I speak for the entire clan (except Joe)
    • View Profile
Re: Fixing a Pioneer Elite Pro 200 RPTV
« Reply #16 on: June 11, 2009, 02:24:24 pm »
"goes ZAP" ?

Are you hearing snapping or popping sound?
Neither?  It goes ZAP, not SNAP or POP (it does CRACKLE slightly after the ZAP though).

It's NOT a problem with inputs.  The screen goes black, nothing displays, at all.  TRUST ME.

Offline Camel

  • Hero Member
  • *****
  • Posts: 1703
    • View Profile
    • BNU Bot
Re: Fixing a Pioneer Elite Pro 200 RPTV
« Reply #17 on: June 11, 2009, 02:26:48 pm »
Sounds like PSU to me. If one of the capacitors has failed, the PSU could be supplying the wrong voltages, which would cause things to appear to be "alive," but non-functional.

<Camel> i said what what
<Blaze> in the butt
<Camel> you want to do it in my butt?
<Blaze> in my butt
<Camel> let's do it in the butt
<Blaze> Okay!

Offline Nate

  • Full Member
  • ***
  • Posts: 425
  • You all suck
    • View Profile
Re: Fixing a Pioneer Elite Pro 200 RPTV
« Reply #18 on: June 11, 2009, 02:45:33 pm »

Offline Chavo

  • x86
  • Hero Member
  • *****
  • Posts: 2219
  • no u
    • View Profile
    • Chavoland
Re: Fixing a Pioneer Elite Pro 200 RPTV
« Reply #19 on: June 11, 2009, 03:01:46 pm »
"goes ZAP" ?

Are you hearing snapping or popping sound?
Neither?  It goes ZAP, not SNAP or POP (it does CRACKLE slightly after the ZAP though).

It's NOT a problem with inputs.  The screen goes black, nothing displays, at all.  TRUST ME.
I was asking if you heard either of them at all, not giving you a choice *rolls eyes*.  However, you did answer the question :)

I would try using your oven before purchasing that expensive of a component that might not be the issue or the right model.  Note: I'm referring to the boards with potentially explosive components like capacitors removed first, not the PSU. Honestly, your best bet might be to just take it to a small electronics shop and ask them to figure out what's wrong (they'll charge you, but it would be a lot less than ordering random components or trying to fix it with the wrong equipment).
« Last Edit: June 11, 2009, 03:03:32 pm by Chavo »

Offline Nate

  • Full Member
  • ***
  • Posts: 425
  • You all suck
    • View Profile
Re: Fixing a Pioneer Elite Pro 200 RPTV
« Reply #20 on: June 11, 2009, 05:36:20 pm »
Capacitors will only blow once, the "Zap" sound is going to be electricity arc'ing off the transformer.