Author Topic: Potato guns (aka potato cannons) (Read 7631 times)

leet_muffin · « **on:** July 15, 2006, 02:26:14 pm »

I like to mess around with potato guns occasionally. I made one out of steel that runs on air, its very clean and a bit more powerful than regular hairspray powered potato guns (also more reliable.).

Anyone wanna know how to build a hairspray one? I could help.

CrAz3D · « **Reply #1 on:** July 15, 2006, 02:40:27 pm »

The only potato cannons i've seen run on huge co2 canisters.

how would a hairspray one work?

MyndFyre · « **Reply #2 on:** July 15, 2006, 02:47:16 pm »

I prefer paintball guns.

Rule · « **Reply #3 on:** July 15, 2006, 02:55:04 pm »

I prefer real guns..
wait...

Ergot · « **Reply #4 on:** July 15, 2006, 03:06:36 pm »

Quote from: CrAz3D on July 15, 2006, 02:40:27 pm

The only potato cannons i've seen run on huge co2 canisters.

how would a hairspray one work?

Load potato... spray a shitload of hair spray... cover the lid, flick the ignitor... WOOSH

http://www.google.com/search?q=how+to+build+potato+cannon+hair+spray&start=0&ie=utf-8&oe=utf-8&client=firefox-a&rls=org.mozilla:en-US:official

leet_muffin · « **Reply #5 on:** July 15, 2006, 03:21:03 pm »

Yeah, what Ergot said. You use a BBQ ignitor (causes a spark) that ignites the hairspray, causing explosing (and expansion) that pushes the potato out.

Crazed, mine runs on an air compressor.

CrAz3D · « **Reply #6 on:** July 15, 2006, 03:22:36 pm »

Quote from: leet_muffin on July 15, 2006, 03:21:03 pm

Yeah, what Ergot said. You use a BBQ ignitor (causes a spark) that ignites the hairspray, causing explosing (and expansion) that pushes the potato out.

Crazed, mine runs on an air compressor.

Why not just use propane?......

Quote from: Rule on July 15, 2006, 02:55:04 pm

I prefer real guns..
wait...

me too, sometimes?
I guess if I were in a duel I'd rather have a bullet shooting gun than a potator shooting gun.

Ergot · « **Reply #7 on:** July 15, 2006, 03:33:51 pm »

Quote from: CrAz3D on July 15, 2006, 03:22:36 pm

Quote from: leet_muffin on July 15, 2006, 03:21:03 pm
Yeah, what Ergot said. You use a BBQ ignitor (causes a spark) that ignites the hairspray, causing explosing (and expansion) that pushes the potato out.

Crazed, mine runs on an air compressor.
Why not just use propane?......

You're trying to launch a potato... not a bowling ball.

CrAz3D · « **Reply #8 on:** July 15, 2006, 03:35:31 pm »

Quote from: Ergot on July 15, 2006, 03:33:51 pm

Quote from: CrAz3D on July 15, 2006, 03:22:36 pm
Quote from: leet_muffin on July 15, 2006, 03:21:03 pm
Yeah, what Ergot said. You use a BBQ ignitor (causes a spark) that ignites the hairspray, causing explosing (and expansion) that pushes the potato out.

Crazed, mine runs on an air compressor.
Why not just use propane?......

You're trying to launch a potato... not a bowling ball.

mmm, is propane cheaper or more expensive?

couldnt you just have a smaller chamber & then put a small amount of propane in that to launch?

leet_muffin · « **Reply #9 on:** July 15, 2006, 03:36:45 pm »

Quote from: CrAz3D on July 15, 2006, 03:22:36 pm

Why not just use propane?......

Propane burns too hot, and might create too violent of an explosion, not sure.

CrAz3D · « **Reply #10 on:** July 15, 2006, 03:37:49 pm »

Quote from: leet_muffin on July 15, 2006, 03:36:45 pm

Quote from: CrAz3D on July 15, 2006, 03:22:36 pm
Why not just use propane?......

Propane burns too hot, and might create too violent of an explosion, not sure.

oooo, but that could be more fun

!

leet_muffin · « **Reply #11 on:** July 15, 2006, 03:38:47 pm »

Personally, I tend to stay away from shrapnel, or the possibility thereof. =)

Ergot · « **Reply #12 on:** July 15, 2006, 03:42:03 pm »

Will this potato gun be mounted on your car?

CrAz3D · « **Reply #13 on:** July 15, 2006, 03:49:11 pm »

Quote from: leet_muffin on July 15, 2006, 03:38:47 pm

Personally, I tend to stay away from shrapnel, or the possibility thereof. =)

but if its made outta steel pipe

Armin · « **Reply #14 on:** July 15, 2006, 03:59:35 pm »

If it's made out of steel, you'd really have to worry about shrapnel, wouldn't you?

CrAz3D · « **Reply #15 on:** July 15, 2006, 04:00:43 pm »

Quote from: MetaL MilitiA on July 15, 2006, 03:59:35 pm

If it's made out of steel, you'd really have to worry about shrapnel, wouldn't you?

not if its thick enough.
Also, if you put the combustion chamber inside of another containment thing then the shrapnel will hit that & not your eye

leet_muffin · « **Reply #16 on:** July 15, 2006, 05:02:09 pm »

Good ideas, all. Most hairspray cannons are made of PVC or ABS plastic. Steel would be much less likely to fragmentate, but if it did... Ouch. I usually dont take risks like that. When I was testing my air powered steel one, I hooked it up to the compressore (at 0 psi) and put it outside on the left side of my garage. I then turned the breaker to the garage off, turned the compressor on, went to the right side of my garage and flipped the breaker back on. You can call it overcautious, but Im still alive. =)

Joe · « **Reply #17 on:** July 16, 2006, 06:30:30 am »

Quote from: leet_muffin on July 15, 2006, 05:02:09 pm

Good ideas, all. Most hairspray cannons are made of PVC or ABS plastic. Steel would be much less likely to fragmentate, but if it did... Ouch. I usually dont take risks like that. When I was testing my air powered steel one, I hooked it up to the compressore (at 0 psi) and put it outside on the left side of my garage. I then turned the breaker to the garage off, turned the compressor on, went to the right side of my garage and flipped the breaker back on. You can call it overcautious, but Im still alive. =)

When I lost the power cable for a pair of speakers that were pieces of junk anyhow, I used my universal power cable thing, set it to 30volts, and hooked it to a power strip. Flipped the power strip on, BOOM. I'm also alive.

wires · « **Reply #18 on:** July 16, 2006, 02:48:48 pm »

Quote from: Joe[x86] on July 16, 2006, 06:30:30 am

Quote from: leet_muffin on July 15, 2006, 05:02:09 pm
Good ideas, all. Most hairspray cannons are made of PVC or ABS plastic. Steel would be much less likely to fragmentate, but if it did... Ouch. I usually dont take risks like that. When I was testing my air powered steel one, I hooked it up to the compressore (at 0 psi) and put it outside on the left side of my garage. I then turned the breaker to the garage off, turned the compressor on, went to the right side of my garage and flipped the breaker back on. You can call it overcautious, but Im still alive. =)

When I lost the power cable for a pair of speakers that were pieces of junk anyhow, I used my universal power cable thing, set it to 30volts, and hooked it to a power strip. Flipped the power strip on, BOOM. I'm also alive.

Damn!

leet_muffin · « **Reply #19 on:** July 16, 2006, 09:32:12 pm »

Quote from: Joe[x86] on July 16, 2006, 06:30:30 am

When I lost the power cable for a pair of speakers that were pieces of junk anyhow, I used my universal power cable thing, set it to 30volts, and hooked it to a power strip. Flipped the power strip on, BOOM. I'm also alive.

I guess I could see how that could possibly be related.. in that you are still alive. And so am I. Anything other than that I might be missing?

Newby · « **Reply #20 on:** July 17, 2006, 01:15:30 pm »

Obviously you're not retarded like Joe. Joe's incident fried half his brain cells. Now he only has 1.

leet_muffin · « **Reply #21 on:** July 17, 2006, 06:30:34 pm »

Quote from: Newby on July 17, 2006, 01:15:30 pm

Obviously you're not retarded like Joe. Joe's incident fried half his brain cells. Now he only has 1.

Hahah, crushed.

News:

Author Topic: Potato guns (aka potato cannons) (Read 7631 times)