Author Topic: APSID"HASD (aka ARRRRRRRG!!) (Read 8732 times)

rabbit · « **on:** December 09, 2005, 02:07:31 pm »

I'm having one problem after another trying to install slack, mostly involving not being able to boot anything. I really need someone to talk me through this over aim..

iago · « **Reply #1 on:** December 09, 2005, 02:17:38 pm »

*pokes Ergot*

www.linuxquestions.org has a complete section of their forum about how to install Slackware. If you have problems, you might get an answer there.

rabbit · « **Reply #2 on:** December 09, 2005, 03:13:16 pm »

Well, I was talking to Warrior, but he exploded.

Anyways, here's what happened:
1. CD ROM boot failed, switched to bare.i boot floppy
2. Bad compressed format (?), failed
3. Flashed BIOS from floppy
4. DOS 5 boot floppy, can't read HD (which is triple faulted says Warrior).
5. Re-downloading disc 1 to make a new CD which may or may not work
6. In the event of the CD not working, A:\>emo /wrists

rabbit · « **Reply #3 on:** December 09, 2005, 04:02:39 pm »

Yay! New disc worked. Running cfdisk

rabbit · « **Reply #4 on:** December 09, 2005, 04:12:59 pm »

Installing..finally....now I just need a really long cat5 cable or a wireless antenna...that and to finish the installation...

rabbit · « **Reply #5 on:** December 09, 2005, 05:53:40 pm »

Installed!

But alas, new problems.

Whenever I try to boot, the message "Error loading OS" comes up.

I can load using the bare.i bootdisk I made during the install, but even still, I don't know how to get KDE (or whatever) running.

Help!

iago · « **Reply #6 on:** December 09, 2005, 06:33:08 pm »

Quote from: rabbit on December 09, 2005, 05:53:40 pm

Installed!

But alas, new problems.

Whenever I try to boot, the message "Error loading OS" comes up.

I can load using the bare.i bootdisk I made during the install, but even still, I don't know how to get KDE (or whatever) running.

Help!

Boot off Slackware's CD.

When prompted for boot:, type:
bare.i root=/dev/hda1 noinitrd ro
[replace /dev/hda1 with whereever Linux is installed to]

That should load up the Linux installation that you just installed. Once it's loaded, log in as root, run "liloconfig", then run "lilo". Hopefully lilo will run successfully.

When running liloconfig:
- Use Advanced
- Store it in the MBR
Every other option should just be common sense

Good luck

rabbit · « **Reply #7 on:** December 09, 2005, 06:44:58 pm »

Well, I loaded with startx and bam, that worked. Now I'm up and running, all I need to do is get an antenna or a long cat5 cable and it'll be in my network!

[edit]
liloconfig is running, and now the big question: how do I change the name? It's defaulted to darkstar....speaking of which...

rabbit · « **Reply #8 on:** December 09, 2005, 07:06:29 pm »

Okay, when I try bare.i ... it says "No such image. [Tab] shows a list"

My only option is "Linux"

Joe · « **Reply #9 on:** December 09, 2005, 07:36:46 pm »

Asume hostname USWest.

su -c "hostname uswest"
su -c "echo 'uswest' > /etc/hostname"
su -c "reboot now"

The first line may be unneeded. I don't remember.

EDIT -
You'll be prompted for a password, its the password you used when you set it up, etc. If you're running as root, just type the stuff thats in quotes. I don't know if its reboot or not, maybe its restart? One of the two.

rabbit · « **Reply #10 on:** December 09, 2005, 07:41:41 pm »

Joe...what the hell are you talking about? The prompt is for booting, prior to login.

Ergot · « **Reply #11 on:** December 09, 2005, 08:11:20 pm »

Quote from: rabbit on December 09, 2005, 07:41:41 pm

Joe...what the hell are you talking about? The prompt is for booting, prior to login.

Then after login ... you open a terminal and type that in to change your hostname (computer name).

iago · « **Reply #12 on:** December 09, 2005, 08:30:18 pm »

Quote from: rabbit on December 09, 2005, 07:06:29 pm

Okay, when I try bare.i ... it says "No such image. [Tab] shows a list"

My only option is "Linux"

If you boot off the CD, Lilo shouldn't come up. You should get a different kind of prompt.

But if Lilo is coming up, that probably means that you pointed it at the wrong harddrive.

Joe · « **Reply #13 on:** December 09, 2005, 10:49:03 pm »

Quote from: rabbit on December 09, 2005, 07:41:41 pm

Joe...what the hell are you talking about? The prompt is for booting, prior to login.

Quote from: rabbit on December 09, 2005, 06:44:58 pm

Well, I loaded with startx and bam, that worked. Now I'm up and running, all I need to do is get an antenna or a long cat5 cable and it'll be in my network!

[edit]
liloconfig is running, and now the big question: how do I change the name? It's defaulted to darkstar....speaking of which...

rabbit · « **Reply #14 on:** December 10, 2005, 12:15:24 am »

I know, but that wasn't answering my question. I made a seperate thread for the name issue.

Joe · « **Reply #15 on:** December 10, 2005, 12:43:32 am »

Blaze · « **Reply #16 on:** December 10, 2005, 11:45:09 am »

I always name my machine using 'netconfig'.

Sidoh · « **Reply #17 on:** December 10, 2005, 02:00:10 pm »

Quote from: rabbit on December 09, 2005, 04:12:59 pm

Installing..finally....now I just need a really long cat5 cable or a wireless antenna...that and to finish the installation...

Wireless is Satan.

rabbit · « **Reply #18 on:** December 10, 2005, 02:15:25 pm »

But I don't feel like running 40 feet of cable if I don't have to.

Sidoh · « **Reply #19 on:** December 10, 2005, 02:21:32 pm »

Quote from: rabbit on December 10, 2005, 02:15:25 pm

But I don't feel like running 40 feet of cable if I don't have to.

That's all? Haha, the run to my computer from my switch is at least 300 ft.

deadly7 · « **Reply #20 on:** December 10, 2005, 03:40:42 pm »

Ha, my computers are side by side, and the router is right above them! <10 feet of cable.

Sidoh · « **Reply #21 on:** December 10, 2005, 04:00:09 pm »

Quote from: deadly7 on December 10, 2005, 03:40:42 pm

Ha, my computers are side by side, and the router is right above them! <10 feet of cable.

I used half a box of 1000' CAT-5 cable by the time I was done with my room and my server room.

rabbit · « **Reply #22 on:** December 10, 2005, 06:13:16 pm »

And that was how much?

Anyways, CD-ROM and floppy drives, are they /mnt/cdrom and /mnt/floppy? If they are, there's nothing showing up. If they aren't what are the CD-ROM and floppy paths?

[edit]
Nevermind. Ergot is sexy.

Sidoh · « **Reply #23 on:** December 10, 2005, 06:18:38 pm »

Quote from: rabbit on December 10, 2005, 06:13:16 pm

And that was how much?

Free.

Ergot · « **Reply #24 on:** December 10, 2005, 06:19:52 pm »

Haha, Sidoh is the 1337 theif XD ~

Sidoh · « **Reply #25 on:** December 10, 2005, 06:25:11 pm »

Quote from: Ergot on December 10, 2005, 06:19:52 pm

Haha, Sidoh is the 1337 theif XD ~

Haha. My boss let me have a box of CAT-5 cable since my school doesn't use it any more.

Warrior · « **Reply #26 on:** December 17, 2005, 09:18:18 am »

Rabbit: No they are in /dev (Devices). /mnt is a temporary folder which is normally used for mounting block devices (You can mount them anywhere really). Do "man mount" for more information on mounting devices. I believe you can specify which Filesystem and RW flags not sure though.

Sidoh · « **Reply #27 on:** December 17, 2005, 11:51:16 am »

FUCK. I completely forgot to ship that cable, rabbit. I was so goddamn busy this week. It'll probably be a while before I'll have the chance again since the school is locked and I'm leaving for vacation tomorrow, but I'll try to get around to it.

rabbit · « **Reply #28 on:** December 17, 2005, 04:29:51 pm »

Nyaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaarrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!

Joe · « **Reply #29 on:** December 18, 2005, 12:05:10 am »

Anyways, CD-ROM and floppy drives, are they /mnt/cdrom and /mnt/floppy? If they are, there's nothing showing up. If they aren't what are the CD-ROM and floppy paths?

su
mount /dev/hdb /mnt/cdrom
mount /dev/fd0 /mnt/floppy

Sidoh · « **Reply #30 on:** December 18, 2005, 12:17:08 am »

Quote from: rabbit on December 17, 2005, 04:29:51 pm

Nyaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaarrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!

Sorry, man. I'll do my best to get one out to you this week.

Ergot · « **Reply #31 on:** December 18, 2005, 12:36:15 am »

Quote from: Joe[e2] on December 18, 2005, 12:05:10 am

Anyways, CD-ROM and floppy drives, are they /mnt/cdrom and /mnt/floppy? If they are, there's nothing showing up. If they aren't what are the CD-ROM and floppy paths?
su
mount /dev/hdb /mnt/cdrom
mount /dev/fd0 /mnt/floppy

Wtf are you talking about? Did you mount them right? Is there something in them?

rabbit · « **Reply #32 on:** December 18, 2005, 02:18:01 pm »

Mounting is not an issue anymore, and besides, my CD-ROM is /dev/hdd and my DVD-ROM is /dev/hdc. I don't care all that much about floppy right now, but if I need to I can just use /dev/floppy...

Chavo · « **Reply #33 on:** December 18, 2005, 07:04:27 pm »

Quote from: Sidoh on December 10, 2005, 02:21:32 pm

Quote from: rabbit on December 10, 2005, 02:15:25 pm
But I don't feel like running 40 feet of cable if I don't have to.

That's all? Haha, the run to my computer from my switch is at least 300 ft.

Yay packet loss!

News:

Author Topic: APSID"HASD (aka ARRRRRRRG!!) (Read 8732 times)