Author Topic: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)  (Read 4365 times)

0 Members and 1 Guest are viewing this topic.

Offline Joe

  • B&
  • Moderator
  • Hero Member
  • *****
  • Posts: 10330
  • In Soviet Russia, text read you!
    • View Profile
    • Github
ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« on: March 17, 2007, 02:13:16 am »
When I was looking at some CheckRevision stuff today, I found this. Here's what I ended up with for a quick commenting of it. IDA did most of it.

Enjoy!

Code: [Select]
; ver-IX86-5.dll 0x10002A78

; int __cdecl GetExeInfo(LPCSTR lpFileName,int)
GetExeInfo proc near

FileTime= FILETIME ptr -150h
SystemTime= _SYSTEMTIME ptr -10h
lpFileName= dword ptr  8
arg_4= dword ptr  0Ch

push    ebp
mov     ebp, esp
sub     esp, 150h
push    esi
mov     esi, [ebp+arg_4]
lea     eax, [ebp+FileTime]
push    edi
and     byte ptr [esi], 0
push    eax             ; lpFindFileData
push    [ebp+lpFileName] ; lpFileName
call    ds:FindFirstFileA
mov     edi, eax
cmp     edi, 0FFFFFFFFh
jz      short loc_10002AF

; At this point we can either jump to the bottom, or get the exe info

lea     eax, [ebp+SystemTime]
push    eax             ; lpSystemTime
lea     eax, [ebp-13Ch]
push    eax             ; lpFileTime
call    ds:FileTimeToSystemTime
movzx   eax, [ebp+SystemTime.wSecond]
push    dword ptr [ebp-130h]
and     byte ptr [ebp-105h], 0
push    eax
movzx   eax, [ebp+SystemTime.wMinute]
push    eax
movzx   eax, [ebp+SystemTime.wHour]
push    eax
push    64h
movzx   eax, [ebp+SystemTime.wYear]
cdq
pop     ecx
idiv    ecx
movzx   eax, [ebp+SystemTime.wDay]
push    edx
push    eax
movzx   eax, [ebp+SystemTime.wMonth]
push    eax
lea     eax, [ebp-124h]
push    eax
push    offset aS02u02u02u02u0 ; "%s %02u/%02u/%02u %02u:%02u:%02u %u" ;this is the format given to wsprintf
push    esi             ; LPSTR
call    ds:wsprintfA
add     esp, 28h
push    edi             ; hFindFile
call    ds:FindClose

; here's where we return stuffs

loc_10002AFF:
pop     edi
pop     esi
leave
retn
GetExeInfo endp

Pseudo-C++:
Code: [Select]
LPCSTR GetExeInfo(LPCSTR lpFileName, int dwUnk0)
{
int edi = FindFirstFileA(lpFileName);
if(edi == 0x0FFFFFFFFh)
{
return 0;
}
else
{
// I'm not sure how we got the File Time. Pretend we did and it's in ft
SystemTime st = FileTimeToSystemTime(ft);
return wsprintf("%s %02u/%02u/%02u %02u:%02u:%02u %u", st.wMonth, st.wDay, st.wYear, st.wHour, st.wMinute, st.wSecond, /* unknown, [ebp-150], something outside our space */);
}
}
I'd personally do as Joe suggests

You might be right about that, Joe.


Offline Eric

  • Full Member
  • ***
  • Posts: 304
  • I'm new here!
    • View Profile
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #1 on: March 17, 2007, 02:51:33 am »
...?

Offline Blaze

  • x86
  • Hero Member
  • *****
  • Posts: 7136
  • Canadian
    • View Profile
    • Maide
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #2 on: March 17, 2007, 02:52:46 am »
Quote
(2:45:35 AM) Blaze: This is what I bet Skywing was thinking when he patched BNLS:  "What?  Is this all they did?  Hrm... I wonder if I can write the code for this before I finish a yawn... "
(2:45:49 AM) Joe: Probably.
(2:46:10 AM) Blaze: What you're thinking is "WTF IS GOING ON1!111!1 :'("
(2:48:30 AM) Joe: yeah.
And like a fool I believed myself, and thought I was somebody else...

Offline Joe

  • B&
  • Moderator
  • Hero Member
  • *****
  • Posts: 10330
  • In Soviet Russia, text read you!
    • View Profile
    • Github
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #3 on: March 17, 2007, 03:02:59 am »
I'd personally do as Joe suggests

You might be right about that, Joe.


Offline iago

  • Leader
  • Administrator
  • Hero Member
  • *****
  • Posts: 17931
  • Fnord.
    • View Profile
    • SkullSecurity
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #4 on: March 17, 2007, 10:36:18 am »
yep, that's the easy part -- now do the rest of it :P

By the way, if you want a list of Storm.dll exports, http://www.javaop.com/~ron/documents/Storm.txt

Offline Joe

  • B&
  • Moderator
  • Hero Member
  • *****
  • Posts: 10330
  • In Soviet Russia, text read you!
    • View Profile
    • Github
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #5 on: March 17, 2007, 03:51:59 pm »
What's at ebp-150, iago?
I'd personally do as Joe suggests

You might be right about that, Joe.


Offline iago

  • Leader
  • Administrator
  • Hero Member
  • *****
  • Posts: 17931
  • Fnord.
    • View Profile
    • SkullSecurity
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #6 on: March 17, 2007, 04:27:48 pm »
How the hell would I know?

Incidentally, you're going to get the wrong checksum returned if you try to call that function directly, because it'll checksum the current running program.

Offline Joe

  • B&
  • Moderator
  • Hero Member
  • *****
  • Posts: 10330
  • In Soviet Russia, text read you!
    • View Profile
    • Github
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #7 on: March 18, 2007, 12:50:02 am »
How the hell would I know?
I thought [ebp-150] was some standard thing in assembly. Kind of like how if someone asked you what [esi] is you could say it's the stack pointer (I think), you know?

Incidentally, you're going to get the wrong checksum returned if you try to call that function directly, because it'll checksum the current running program.

I sort of noticed that, but I just discarded it as something that I just didn't understand.
I'd personally do as Joe suggests

You might be right about that, Joe.


Offline iago

  • Leader
  • Administrator
  • Hero Member
  • *****
  • Posts: 17931
  • Fnord.
    • View Profile
    • SkullSecurity
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #8 on: March 18, 2007, 12:55:24 am »
esp is the stack pointer.

ebp is often the frame pointer.

Anything can be stored on the stack, and the frame is part of the stack.

You'll find it all in my pamphlet.

Offline MyndFyre

  • Boticulator Extraordinaire
  • x86
  • Hero Member
  • *****
  • Posts: 4550
  • The wait is over.
    • View Profile
    • JinxBot :: the evolution in boticulation
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #9 on: March 19, 2007, 12:41:50 am »
How the hell would I know?
I thought [ebp-150] was some standard thing in assembly. Kind of like how if someone asked you what [esi] is you could say it's the stack pointer (I think), you know?

It's probably a local variable.
I have a programming folder, and I have nothing of value there

Running with Code has a new home!

Our species really annoys me.

Offline Joe

  • B&
  • Moderator
  • Hero Member
  • *****
  • Posts: 10330
  • In Soviet Russia, text read you!
    • View Profile
    • Github
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #10 on: March 19, 2007, 02:54:43 am »
Another sign to myself that I'm developing dyslexia. ebp-150 isn't used anywhere. Eh, oh well.

Anyhow, I did some more work on figuring this out. And woo, I've got a full copy of IDA now. ^_^

Code: [Select]
.text:10002B89 ; int __cdecl GetExeInfo(LPCSTR lpcstr_exepath,LPCSTR lpcstr_return)
.text:10002B89 GetExeInfo      proc near               ; CODE XREF: CheckRevision+38p
.text:10002B89
.text:10002B89 FileTime        = FILETIME ptr -150h
.text:10002B89 SystemTime      = _SYSTEMTIME ptr -10h
.text:10002B89 lpcstr_exepath  = dword ptr  8
.text:10002B89 lpcstr_return   = dword ptr  0Ch
.text:10002B89
.text:10002B89                 push    ebp
.text:10002B8A                 mov     ebp, esp
.text:10002B8C                 sub     esp, 150h
.text:10002B92                 push    esi
.text:10002B93                 mov     esi, [ebp+lpcstr_return] ; From here on, ESI points to lpcstr_return
.text:10002B96                 lea     eax, [ebp+FileTime]
.text:10002B9C                 push    edi
.text:10002B9D                 and     byte ptr [esi], 0
.text:10002BA0                 push    eax             ; LPWIN32_FIND_DATA
.text:10002BA1                 push    [ebp+lpcstr_exepath] ; exe path
.text:10002BA4                 call    ds:FindFirstFileA ;
.text:10002BA4                                         ; This chunk of code gets a handle to the EXE,
.text:10002BA4                                         ; moves it to EDI, and then makes sure that it
.text:10002BA4                                         ; actually exists
.text:10002BA4                                         ;
.text:10002BA4                                         ; Also, the second argument of FindFirstFile will
.text:10002BA4                                         ; become a reference to a WIN32_FIND_DATA struct,
.text:10002BA4                                         ; and [ptr+4] is "FILETIME ftCreationTime".
.text:10002BA4                                         ;
.text:10002BAA                 mov     edi, eax
.text:10002BAC                 cmp     edi, 0FFFFFFFFh
.text:10002BAF                 jz      short loc_10002C10
.text:10002BB1                 lea     eax, [ebp+SystemTime]
.text:10002BB4                 push    eax
.text:10002BB5                 lea     eax, [ebp-13Ch] ; Pointer to the FILETIME struct, obtained from FindFirstFile
.text:10002BBB                 push    eax
.text:10002BBC                 call    ds:FileTimeToSystemTime ; This assigns [ebp+SystemTime] to the proper value.
.text:10002BC2                 movzx   eax, [ebp+SystemTime.wSecond]
.text:10002BC6                 push    dword ptr [ebp-130h] ; This apparently is the length of the EXE file
.text:10002BCC                 and     byte ptr [ebp-105h], 0
.text:10002BD3                 push    eax
.text:10002BD4                 movzx   eax, [ebp+SystemTime.wMinute]
.text:10002BD8                 push    eax
.text:10002BD9                 movzx   eax, [ebp+SystemTime.wHour]
.text:10002BDD                 push    eax
.text:10002BDE                 push    64h
.text:10002BE0                 movzx   eax, [ebp+SystemTime.wYear]
.text:10002BE4                 cdq
.text:10002BE5                 pop     ecx
.text:10002BE6                 idiv    ecx
.text:10002BE8                 movzx   eax, [ebp+SystemTime.wDay]
.text:10002BEC                 push    edx
.text:10002BED                 push    eax
.text:10002BEE                 movzx   eax, [ebp+SystemTime.wMonth]
.text:10002BF2                 push    eax
.text:10002BF3                 lea     eax, [ebp-124h] ; This points to a string specifing the exe name.
.text:10002BF3                                         ; Example: starcraft.exe
.text:10002BF9                 push    eax
.text:10002BFA                 push    offset aS02u02u02u02u0 ; "%s %02u/%02u/%02u %02u:%02u:%02u %u"
.text:10002BFF                 push    esi             ; This is where the string is returned to
.text:10002BFF                                         ; Note: This points to [ebp+lpcstr_return]
.text:10002C00                 call    ds:wsprintfA    ;
.text:10002C00                                         ; return wsprintf(esi,
.text:10002C00                                         ; "%s %02u/%02u/%02u %02u/%02u/%02u %u", [ebp-124h],
.text:10002C00                                         ; wMonth, wDay, wYear % 100, wHour, wMinute,
.text:10002C00                                         ; wSecond, dword ptr [ebp-130h])
.text:10002C00                                         ;
.text:10002C00                                         ; starcraft.exe MO/DY/YR HR:MN:SC size
.text:10002C00                                         ;
.text:10002C06                 add     esp, 28h
.text:10002C09                 push    edi
.text:10002C0A                 call    ds:FindClose
.text:10002C10
.text:10002C10 loc_10002C10:                           ; CODE XREF: GetExeInfo+26j
.text:10002C10                 pop     edi
.text:10002C11                 pop     esi
.text:10002C12                 leave
.text:10002C13                 retn
.text:10002C13 GetExeInfo      endp
« Last Edit: March 19, 2007, 03:10:25 am by Joe[x86] »
I'd personally do as Joe suggests

You might be right about that, Joe.


Offline mynameistmp

  • Full Member
  • ***
  • Posts: 111
  • Hi! I'm new here!
    • View Profile
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #11 on: March 27, 2007, 10:06:48 pm »
I haven't been terribly active as of late... is the updated battle.net logon closed information?

Offline Joe

  • B&
  • Moderator
  • Hero Member
  • *****
  • Posts: 10330
  • In Soviet Russia, text read you!
    • View Profile
    • Github
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #12 on: March 28, 2007, 12:34:29 am »
You probably mean CheckRevision -- the protocol itself hasn't changed.

It's not necessarily closed -- more of a lack of it in the first place. Yoni and/or Skywing know it, obviously, or have at least cracked it to the point where BNLS can run it. They're not releasing it.

Unless someone hasn't come out and said it yet, warz is the closest, and his information is released but incomplete.

You probably know, but this is the old EXE info. This isn't used by StarCraft anymore, but is still active in Diablo II and WarCraft II, I think.
I'd personally do as Joe suggests

You might be right about that, Joe.


Offline warz

  • Hero Member
  • *****
  • Posts: 1139
    • View Profile
    • chyea.org
Re: ver-IX86-5.dll -- LPCSTR GetExeInfo(LPCSTR, int)
« Reply #13 on: March 30, 2007, 07:48:41 pm »
the method in which checkrevision obtains the information regarding the file itself has not changed, and you're somewhat reinventing the wheel here. point is you know what that function does, but so does everyone else, and has for years, so just rename it in IDA, and move along. also, if you're picking at it for learning sake, there's easier functions in checkrevision to learn from - specifically the checkrevision function itself. just look at it as a whole, and try to make a flow chart, or psuedocode draw up of the function itself. it's pretty simple with a few function calls, and a loop or two.
http://www.chyea.org/ - web based markup debugger