Debian + mouse wheel

[Super_X]

I feel dumb, but I've looked on the google and asked Erogot, too.

Here's what my problem is: No mouse three, and no scroll wheel. Poor me.

Here's what's in my /etc/X11/XF86Config-4 for "mouse":

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "PS/2"
        Option          "Emulate3Buttons"       "true"
        Option          "ZAxisMapping"          "4 5"
EndSection
Section "InputDevice"
        Identifier      "Generic Mouse"
        Driver          "mouse"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "true"
        Option          "ZAxisMapping"          "4 5"

I know that there's two mice things, but I'm not really sure why so I'll mess with that later. The thing that gets me is there is a "Option 'ZAxisMapping' '4 5'" part, as far as I know, that's usually the scroll wheel and mouse three.

Any help would please me. <33 ?

[rabbit]

Change Protocol to "Auto", see if that works.

[chuck]

Give me a minute... I just had this problem with my linux desktop... *digs out the computer and boots it up*

EDIT:
Heres my mouse configuration for a 2 button ps2 mouse with a scroll wheel:

Code: [Select]

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/psaux"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

    Option "Buttons" "4"

    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "true"
    Option "SendCoreEvents" "true"

EndSection


[Ergot]

Hey wait a minute... Changed the

Code: [Select]

Option          "Protocol"              "PS/2"
Under "Configured Mouse" to

Code: [Select]

Option          "Protocol"              "ImPS/2"

If that doesn't work, the only thing I see different in chuck's config is

Code: [Select]

Option "Buttons" "4"


[Chavo]

Normally you don't want to use "Emulate3Buttons" if you have a 3 button mouse, I'm confused by your post as to whether you do or not, but that may be the problem.

[Ergot]

I don't believe that matters since all that does is make mouse1+mouse2 == mouse3

[Super_X]

I was told today to  # out the ps/2 part, we'll see if that works.

[Edit]
Nope, didn't help. I'll work on it some more. Hopefully we can figure it out.

[Super_X]

Hey wait a minute... Changed the

Code: [Select]

Option          "Protocol"              "PS/2"
Under "Configured Mouse" to

Code: [Select]

Option          "Protocol"              "ImPS/2"


Yay! That's what I did, the "ImPS/2," I switched the regular "PS/2" to "ImPS/2" Woo.

[Ergot]

. Helped that I saw the full log and wasn't sleepy keke. ^^.

[Super_X]

. Helped that I saw the full log and wasn't sleepy keke. ^^.

Ahh, I see. Sweet thanks, mang.